Production Introduction
HCD series of cabinet dryers are mostly used for simultaneous drying of different kinds of polymers insmall quantities or for drying materials for trial moulding. They can also be applied in electronic engineering, electroplating, pharmacy, paint baking, printing industries etc. For preheating or drying related product.
Special Features
*Comtrolled by P. I. D. Accurate electronic temperature contorller.
*Heat-saled door can keep consistent temperature inside of machine and minimize power consumption.
*Stainless steel trays and internal parts can keep the materisl from pollution.
*Easy for maintenance.
*Air inlet and outlet is designed to easily adjust the air flow.
*Overtemperature protector.
*Motor overload protector.
*Amp meter and main power switch on the control panel.
*24h timer for automatic start-up.
Working principle
Each cabinet contains removable trays, into which the material to be dried, During operation, a blower forces air through a heating chamber located on one side of the cabinet. The heated air then passes through a perforated side wall and over the trays of polymer material. As the materil dries, the moist air is exhausted through the other side of the cabinet.
Note:
*Power supply must be elected assigned voltage.
*Have any special needs, please contact us.
*Please excuse for not note if some specifications of products are changed.
| Type |
Heater power(kw) |
Blower power(w) |
Material loading capacity(kg) |
Numder of trays |
Weight(kg) |
Internal dimensionH×W×L(mm)
|
External dimensionL×H×W(mm) |
| HCD-5 |
4 |
370 |
50 |
5 |
148 |
660×600×550 |
1200×800×620 |
| HCD-9 |
4.5 |
370 |
100 |
9 |
178 |
990×600×550 |
1440×800×620 |
| HCD-20 |
9 |
1500 |
200 |
20 |
415 |
1000×900×800 |
1700×1210×870 |
Audited Supplier 
){kind=link}
){kind=link}